2 Solutions to Check If a Hard Drive Is Failing with SMART 

Introduction

On Windows 10, besides often checking and fixing logical errors and other programs on drives, it’s also a great idea to regularly check whether that rotating platter hard-disk drive (HDD) or Solid-State Drive (SSD) is reliable to prevent sudden hardware failure.

The only thing you need to notice is that Windows 10 does not include a separate mechanism for determining hardware status.

SMART stands for Self-monitoring, Analysis, Reporting and Technology. It is a monitoring system utility that is included on your computer’s HDD or SSD drive and can measure the reliability of your computer’s drive.

You can use tools like command prompt, tools such as PowerShell and Performance Monitor to access hard drive’s status thus to check if the device still has physical health problems or fails due to hardware issues.

Therefore, it is necessary to check if a hard drive failing using SMART. In fact, there are two methods for you to check hard drive health and find out whether it has a SMART hard drive error.

In the following section, specific solutions to check if a hard drive failing using SMART will be introduced to you. If you are eager to find the methods, please pay attention to it.

2 Solutions to Check Hard Drive Health

In this guide, multiple ways will be given to you to help you check if a hard drive failing using SMART quickly. As mentioned above, Command Prompt, PowerShell can be used to check hard drive health, but there are other alternatives to do this besides the two tools.

Now, I will explain the methods specifically to you.

Through Command Prompt

There are two methods at least to check the state of SMART by Command Prompt to make sure if there are any hardware issues with the hard drive.

To utilize the Windows management Instrumentation Command-line utility, please follow the next steps.

Step 1: Type command prompt in the search box. As it appears in the page, right click it and then choose the Run as administrator option.

Step 2: After typing the wmic diskdrive get status command in the pop-up page, press the Enter key. After that, you will see the status of your drive.

If you would like to check the prediction failure status to assure if the hard drive is beginning to fail, you can use these steps.

Step 1: Open the Command Prompt in the search window and run it as administrator.

Step 2: Type the wmic /namespace:\rootwmi path MSStorageDriver_FailurePredictStatus command and press the Enter key to determine if the drive has failures.

Through PowerShell

Like Command Prompt, PowerShell can also enable you to check if a hard drive failing using SMART. The below are specific steps.

Step 1: Find out PowerShell in the search window, and then run it administrator.

Step 2: After typing the Get-WmiObject -namespace rootwmi –class MSStorageDriver_FailurePredictStatus command, press the Enter key to continue.

If the status is “False”, your drive runs well. On the contrary, if the status is “True”, is means that SMART is predicting the drive’s potential failure. If the reason volume gives you a value larger than 0, you need to get in contact with the manufacturer to know the code.

This article may also be helpful for you to find hard drive failure: Here Are 6 Signs Indicating Hard Drive Failure, Check out Now

If you find SAMRT failure on your hard disk, this post may be of great help to you: SMART Failure Predicted on Hard Disk? Quickly Fix It Now

Through the given methods, you can check if a hard drive is failing using SMART with ease. With the reference articles, you can fix the issue.