How to Fix Vizio TV Stuck on “SmartCast is starting up” Issue?

Why is Vizio TV stuck on SmartCast? This issue may be caused by different reasons like weak or unstable Internet connection, etc. But whatever case you are in, you can choose one of the following methods to solve this problem.

So, how to fix Vizio TV stuck on setup screen? Scroll down to know the detail.

Method 1: Check Your Internet Connection

Sometimes, if there is a problem with your network connection, you may see the error message “SmartCast is starting up. Please wait…”. So, the simplest and easiest way to fix the Vizio TV stuck on SmartCast issue is to check your Internet connection.

Make sure that you connect the router to the Vizio TV correctly. To get a fast and stable internet connection, I recommend you connect to the Vizio TV through an ethernet cable. In addition, you can try to connect your TV using another network to see if it works or not.

Method 2: Update the Vizio TV

Vizio will release new updates when they find fixes for any firmware bugs, so the second method to fix Vizio TV stuck on SmartCast is to update the Vizio TV. Here is how to do that:

Step 1: Press the Menu button on the Vizio remote.

Top 6 Methods to Fix Vizio Remote Not Working

A great many people report Vizio remote not working. Are you also troubled by the issue? This post summarizes the top 6 ways to fix Vizio TV remote not working.

Read More

Step 2: Choose the System option, and then choose Check for Updates.

Step 3: If a new update is available, please install it. Then, open your Vizio TV to check if there is still the Vizio TV stuck on setup screen issue.

Method 3: Perform a Soft Reset

In addition, you can use the remote to perform a soft reset. How to do that? Here is the guide:

Step 1: Tap the Menu button and navigate to System.

Step 2: In System, choose the Reset and Admin option.

Step 3: Choose Soft Power Cycle and choose Yes to confirm. Then, wait for your Vizio TV to reboot.

If this method doesn’t work, you can try a hard reset instead.

Method 4: Perform a Hard Reset

Performing a hard reset means you need to unplug the TV. Follow the steps below to do that:

Step 1: Turn off your TV and unplug it. (Do the same with your router and modem.)

Step 2: Press and hold the power button on the TV for 30 seconds.

Step 3: Wait for at least 1 minute and then plug the power back in.

After that, please turn on your Vizio TV and check if the Vizio TV stuck on setup screen issue is fixed.

Method 5: Reset the TV to Factory Settings

If none of these methods work, you may try to perform a factory reset to fix Vizio TV stuck on SmartCast. This will restore the TV to its original settings, including the original firmware. How to do that? Here is the complete guide:

Step 1: Follow Step 1-2 in Method 3, and then choose Reset TV to Factory Defaults.

Step 2: Enter your passcode or the default code: 0000 and then choose Reset.

Step 3: Press OK on the remote to confirm the factory reset. Then, wait for the TV to turn off and then back on again.

That’s all about how to fix the Vizio TV stuck on SmartCast issue. Do you have any questions about this topic? Please leave them in the comment zone and we will try to answer them as soon as possible.

How to Install 3rd Party Apps on Samsung Smart TV [Full Guide]

A lot of users are confused about how to install 3rd party apps on Samsung Smart TV. If you are also searching for a full guide, this post is what you need.

Read More