Easy and Effective Ways to Fix the AirPods Flashing Orange Error

Why Are My AirPods Flashing Orange

Apple AirPods are user-friendly and minimalistic. Importantly, they can integrate seamlessly with iPhones. Given that fact, AirPods become one of the most popular and best-performing wireless earbuds on the market.

Even so, a lot of users complain AirPods flashing orange. Why are my AirPods flashing orange? You can see such complaints in the forums and communities. After looking into many cases, we find the following possible causes for the AirPods flashing orange issue.

• Connections issues between AirPods and iPhones
• Bugs with the iPhone device.
• Outdated firmware of the AirPods
• Etc.

What Does AirPods Flashing Orange Mean

What does it mean when your AirPods are flashing? Fashing orange light AirPods means that the AirPods have encountered an unrecoverable error, which is different from the orange or amber light. To be specific, they are experiencing a pairing error and they need to be reset to pair again.

Further reading:

You might have noticed that AirPods LED don’t always flash with the same colour. In addition to orange, they can be solid green, solid amber, flashing white, or flashing amber. What does these colours mean? Here, we explain them one by one.

• Green: When the LED turns green, it indicates that the case is fully charged or the AirPods are fully charged.
• Amber: It is also referred to as orange. When the AirPods case is charging or AirPods are charging, the LED will turn this corlor.
• Flashing white: When the LED is flashing white, it indicates that it’s ready to be paired via Bluetooth.
• Flashing amber: You will see this light when the AirPods or AirPods Pro have encountered an error and they can’t recover from without further operations.

Method 1: Factory Reset AirPods

Step 1: Navigate to Settings on your iPhone device.

Step 2: Pick Bluetooth and then choose AirPods in the device list.

Step 3: Click on the information button next to your AirPods.

Step 4: Choose Forget This Device.

Step 5: Put the AirPods back in the charging case and then close the lid.

Step 6: After a few seconds, open the lid and press the setup button at the back of the charging case until you see an amber light flashing and then turning white.

Step 7: Reconnect the iPhone to the AirPods, and then hold both iPhone and the pods close to each other.

Step 8: You will see an animation of AirPods on the iPhone screen. Choose Connect and wait patiently until the devices are connected and press Done.

AirPods Volume too Low | Why and How to Make AirPods Louder

Are you thinking your current AirPods volume too low? How to make AirPods louder? Well, this post can give you some ideas.

Read More

Method 2: Restart Your iPhone Device

As you might know, restarting device can solve many issues. Here, you can try restarting the iPhone to remove much junk memory or random bugs that may affect the connection between your iPhone and AirPods.

• Hold the Power button until the power slider appears on the screen.
• Slid the power slider to the right to turn off the device.
• Turn on the iPhone again after waiting a few seconds.

Genshin Impact Failed to Check for Updates [4 Solutions]

How to solve the Genshin Impact failed to check for updates error? If you also wonder it, this post is what you need. It offers you some solutions.

Read More

Method 3: Update the Firmware of AirPods

You can also see the orange light on AirPods due to the outdated firmware of AirPods. If so, update the Airpod’s firmware. However, a new firmware is only automatically installed over the air.

If you insist on updating firmware, you can perform a force update by following these steps.

Step 1: Set one Airpod aside and place the other one into the case. After that, close the lid and reconnect the Airpod in the case.

Step 2: After it is connected, take the paired Airpod from the case. Use it to listen to some music for about five or ten minutes. Then put this paired Airpod away.

Step 3: Hold the other Airpod and put it back into the case.

Step 4: Repeat the previous steps to make sure that the unpaired Airpod is reconnected to your iPhone.

Step 5: Put both AirPods back into the charging case with the lid open.

Step 6: Connect the case to a power source for about an hour. Then close your charging case and leave it recharging for another hour or so.

Step 7: Open Settings on your device and choose Bluetooth.

Step 8: Remove the two AirPods and open the charging case. Now, pair AirPods as usual.

Also read: Convert Valorant to CSGO with the Valorant Sens Converter