How to Remove Yellow Exclamation Point in Device Manager? Fixed

What Does Yellow Exclamation Point in Device Manager Mean

After you open Device Manager and expand the device category, you may see a yellow exclamation mark next to the driver. What does it mean? Well, it is an indication of a device’s present status. It may indicate that there’s a system resource conflict, driver missing, or outdated driver.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

So, when you see the Device Manager yellow mark sign, you can check if these issues occur on your PC. Then take actions to resolve them and remove yellow exclamation mark on Device Manager.

How to Remove Yellow Exclamation Mark in Device Manager

As you see, the yellow exclamation point in Device Manager means there’s something wrong with the driver. Therefore, you’d better make some measures to remove it. In this section, two troubleshooting methods are provided.

Way 1: Update the Driver

Updating the driver is an effective way to remove the Device Manager yellow mark sign. You can solve the problem by updating the driver that displays the yellow exclamation mark.

Step 1: Right-click the Windows icon to open the Start menu and then click Device Manager.

Step 2: Expand the driver category by double-clicking it.

Step 3: Right-click the target driver and hit Update driver on the context menu.

Step 4: In the next window, click on Search automatically for drivers to automatically update the driver. If you want to update the driver manually, hit Browse my computer for drivers instead.

Step 5: Follow the on-screen instructions to complete the operation.

Way 2: Uninstall and Reinstall the Driver

Uninstalling and reinstalling the driver is another way to get rid of the yellow exclamation mark in Device Manager. You can have a try.

Step 1: Open Device Manager and access the target driver again.

Step 2: Right-click on the target driver and hit Uninstall device.

Step 3: In the warning window, click Uninstall to confirm the operation.

Step 4: Once the uninstall process ends, restart the computer. After the PC restarts, Windows will automatically reinstall the driver. Alternatively, download the driver from the official website and install it by following the prompted instructions.

Device Manager Error Codes

In addition to yellow exclamation mark, you may also see various error codes in Device Manager. Frequently encountered Device Manager error codes are summarized as follows.

• Code 10: It happens with the error message “This device cannot start”. You can resolve the issue by restarting the PC, updating the device driver, installing the latest Windows updates, replacing the hardware, etc.
• Code 19: It appears with the message “Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. To fix this problem, you should uninstall and then reinstall the hardware device”. To fix the issue, you can restart the computer, delete UpperFilters and LowerFilters registry values, reinstall the device driver, perform a system restore, etc.
• Code 28: When you encounter code 28 in Device Manager, try restarting the computer, undoing the change you have made, updating the driver for the device, installing the latest Windows service pack, or replacing the hardware.
• Code 29: It appears along with the error message “This device is disabled because the firmware of the device did not give it the required resources”. To troubleshoot the error, you can restart the PC, perform a system restore, update hardware drivers, roll back the driver, reinstall the driver, enable the hardware device in BIOS, clear the CMOS, reset the expansion card, replace the hardware, or perform a clean install.
• Code 31: It shows up with the error message “This device is not working properly because Windows cannot load the drivers required for this device”. You can fix the issue by restarting the PC, rolling back the driver, performing a system restore, deleting the UpperFilters and LowerFilters registry values, updating the device driver, reinstalling the Microsoft ISATAP network adapter, or replacing the hardware.
• Code 37: This error code displays together with the error message “Windows cannot initialize the device driver for this hardware”. You can get rid of it by restarting the PC, deleting the UpperFilters and LowerFilters registry values, using a different USB port, reinstalling the device driver, running SFC, or replacing the hardware.
• Code 39: The code 39 appears with the message “Windows cannot load the device driver for this hardware. The driver may be corrupted or missing”. You can fix the issue using methods of code 10.

The End

This post tells you what does the yellow exclamation mark on Device Manager mean and how to remove it. Additionally, it also summarizes the frequently encountered error codes in Device Manager.