Thunderbolt Is Not Showing Attached Devices? Here Are 5 Fixes

Thunderbolt is popular because of its high transfer rates. However, some problems may occur when using it, such as Thunderbolt not showing attached devices. Although this problem is annoying, there are several quick fixes that have proven effective.

In this article, we’ll provide possible fixes that may allow your PC to detect devices connected to it via Thunderbolt cables.

How to Do Toshiba Hard Drive Test? Here Are the Tools

How to do a Toshiba hard drive test? Now, you come to the right place. This post introduces three Toshiba hard drive test tools to do that.

Read More

MiniTool Partition Wizard FreeClick to Download100%Clean & Safe

How to Fix Thunderbolt Is Not Showing Attached Devices

Here we summarize several methods to solve the Thunderbolt is not recognized problem. You can try them one by one until the problem gets solved.

Method 1. Check Equipment

Verify that the device is turned on and the power cord is connected. If the device requires a power cord, make sure the power cord is plugged in. Then, check that the Thunderbolt port is thoroughly cleaned and not damaged.

Method 2. Enable Thunderbolt New Connection Configuration

This assumes that the Thunderbolt new configuration option is not enabled. In this case, the BIOS will not allow any new connections via Thunderbolt cables, as the BIOS is responsible for identifying any new devices or gadgets connected to the motherboard or PC.

To access BIOS settings at startup, press the F12 or BIOS button. Access the Onboard Devices option under Advanced and Devices. Verify that Thunderbolt New Connection or Thunderbolt Controller’s settings are enabled. Press F10 or Save to save and exit BIOS settings.

Method 3. Update Windows

You can try to update Windows to solve the “Thunderbolt is not showing attached devices” problem.

Step 1: Press the Win + I key to open Windows Settings. Select Update & Security to open the Windows Update tab.

Step 2: When a Windows feature update becomes available, select Download & install.

If you are unable to upgrade your version of Windows, select Check for updates to download and install any available hotfix updates.

Method 4. Update Thunderbolt Firmware

The Thunderbolt ports on your computer may need to be updated to work properly. Your device only needs a firmware update for efficient data transfer. To do that, please search keywords directly on the website for more information.

Method 5. Update Motherboard BIOS or UEFI

In some cases, a BIOS update is required to fix bugs, enhance stability or performance, or allow the motherboard to support Thunderbolt cables or other devices.

To do this, you need to visit your computer motherboard manufacturer’s official website to download the latest BIOS or UEFI. Then follow the instructions to complete the operation.

Related article: How to Update BIOS Windows 10 | How to Check BIOS Version

How to Destroy a Flash Drive? Here’s the Full Guide

Are you looking for solutions to destroy a flash drive? If so, this article is what you need. It provides a full guide on how to do that.

Read More

Bottom Line

When faced with the “Thunderbolt is not showing attached devices” problem, you can try the several methods above. If you have any other methods about it, you can share them with us in the following comment zone.

Besides, if you encounter data loss or partition loss from different storage devices, you can take advantage of MiniTool Partition Wizard to perform hard drive recovery.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe