Many users get stuck in the blue screen after installing M.2 SSD. Are you also troubled by it? Don’t worry. This post from Partition Magic provides several methods for the BSOD after installing M.2 SSD.

Blue Screen After Installing M.2 SSD

Blue screen is a common error on Windows 10/11 computers and can occur in various situations. For example, a blue screen after Windows update, a blue screen after installing a new CPU or GPU, and as discussed in this article, a blue screen after installing M.2 SSD.

Here is a user from the Microsoft forum who encountered the blue screen after installing M.2 SSD.

Blue Screen after installing M.2. Hi everyone! I have this problem and I hope someone could have an answer: Every time I try to install a new M.2 hard disk (I tried 3 of them in 3 years) my Windows (both Win 10 and Win 11) starts randomly crashing (Blue Screen).https://answers.microsoft.com/en-us/windows/forum/all/bluescreen-after-installing-m2/

Further reading: M.2 SSD is an SSD that uses the M.2 interface, which has the advantages of smaller size and better transmission performance. In addition, there are three common module specifications for the M.2 interface, namely 2242, 2260, and 2280, of which the most common is 2280, where 22 represents width and 80 represents length.

Also read: Meet Kernel Power 41 Error on Windows 10? Here Are Methods!

Recover Lost Data

Blue screen is a system error that can occur in Windows, usually caused by various problems, and can lead to the loss of data and a forced shutdown of the computer.

How to recover lost data? Well, you need to use a data recovery tool. MiniTool Partition Wizard is such a utility that allows you to recover lost data and partitions within a few clicks.

If the device cannot boot normally, you need to boot the computer from a bootable USB. Then follow the on-screen instructions to enter the main interface of MiniTool Partition Wizard. After that, use this software to perform the SSD data recovery.

MiniTool Partition Wizard DemoClick to Download100%Clean & Safe

Proven Solutions for BSOD When Upgrading to Windows Server 2025
Proven Solutions for BSOD When Upgrading to Windows Server 2025

Have you come across the BSOD when upgrading to Windows Server 2025? This post provides several ways to get rid of the Windows Server 2025 BSOD.

Read More

How to Fix Blue Screen After Installing M.2 SSD

Now, you can try the following methods to fix the blue screen after installing M.2 NVMe SSD.

Since you are stuck on the blue screen, you cannot perform tasks normally. Therefore, you need to boot to Windows Recovery Environment and click Troubleshoot > Advanced Options > Startup Settings > F4 > Restart. After that, try the methods given below.

Fix 1. Turn off Fast Startup

You should try to turn off fast start-up to get rid of this issue. Here is the guide:

  1. Type control panel in the Search bar and then click Control Panel.
  2. Set View by: Large icons and then click Power Options.
  3. Open Power Options and click Choose what the power button does in the left panel.
  4. Click Change settings that are currently unavailable. Scroll down to the Shutdown settings section and uncheck Turn on fast startup (recommended). Click Save changes.
turn off fast start-up

Fix 2. Check the Hardware

Sometimes, your hardware may blue screen error. So, when you experience random reboots on Windows, you should check the hardware. You need to check the following points:

  • Check if your hardware is overheating or overclocking. If the computer has overclocking enabled, disable it.
  • Check the power settings. A power failure may cause your Windows computer to overheat, freeze, crash, or display a blue screen of death.
  • Check the cables and connections. If there are any loose connections and damaged cables, it can also cause a blue screen.

Fix 3. Check the RAM

Use the Windows Memory Diagnostic tool to check the RAM. The steps are as follows:

  1. Press the Win + R keys to open the Run window.
  2. Type mdsched.exe in it and click OK to open Windows Memory Diagnostic.
  3. In the pop-up window, click on Restart now and check for problems (recommended). Then your computer will restart automatically and Windows Memory Diagnostic will automatically check your RAM for errors.
  4. Once the diagnostic process is complete, your PC will restart. To view the diagnostic report, press the Win + X keys and select Event viewer. If you see RAM errors in the report, consider replacing your RAM immediately.
run Windows Memory Diagnostic to check memory problems
LM_SERVER_INTERNAL_ERROR 0x00000054 Blue Screen | 9 Ways
LM_SERVER_INTERNAL_ERROR 0x00000054 Blue Screen | 9 Ways

Is there a blue screen appearing on your computer with the LM_SERVER_INTERNAL_ERROR error? If so, try some fixes in this post.

Read More

Bottom Line

This post explores 3 ways to get rid of the blue screen after installing M.2 SSD. You can try them one by one until the issue gets solved.

  • linkedin
  • reddit